Ensure all surfaces are clean, dry and free from dirt, grease and other contaminants.
Metal surfaces: Remove any loose material such as rust, scale, dirt etc. by thorough wire brushing. If surfaces are badly rusted, prime first with International Anti-Rust Primer.
Porous surfaces: Porous surfaces such as wood or brickwork must be sealed first with 2 coats of International Concrete Sealer or International Universal Primer Sealer to prevent this product drying out.
Plastic surfaces: Clean with International Easy Sand.
How to use
Do not stir.
Apply only to areas safely above head height (ie. a minimum of 3m) and where accidental contact with persons or pets will not occur.
Apply one generous coat directly from the tin using a short bristle brush or a lambswool mitt, to give a thick protective layer. Brush marks will remain visible.
In the event of contamination, remove with warm soapy water.
Wear suitable protective clothing including gloves and eye/face protection.
Cleaning
Health and safety
Safety, Health and Environment
International is a brand of Imperial Chemical Industries Limited trading as ICI Paints AkzoNobel. It is the policy of AkzoNobel to provide the highest standard of safety, health and environmental advice and information. Safety data sheets are freely available on the website or to users on request.
Ensure good ventilation during application and drying.
Avoid the inhalation of dust. Wear a suitable face mask if dry sanding.
Special precautions should be taken during surface preparation of pre-1960s paint surfaces over wood and metal as they may contain harmful lead.
Trade tip
Anti-Burglar Paint cannot be overcoated with any other material.
