Ensure all surfaces are clean, dry and free from dirt, grease and other contaminants.
All surfaces must be cool before and during preparation and application.
Spot prime any areas of bare metal with an appropriate metal primer.
Apply a coat of International Wipe On Multi-Surface Primer, following the instructions on the can. This is essential to ensure the surface is clean and the paint will adhere properly.
Mask off any areas which are not to be painted, such as plastic trim and handles. If plastic trim and handles are to be painted, test the paint for adhesion on a small area first.
How to use
For best results spray at room temperature (20°C).
Shake can vigorously for 2-3 minutes before use. This is essential to ensure an even finish.
Several thin coats should be applied at 20 minute intervals. Hold the can approximately 20-25cms away from the surface and move in a sweeping motion. Ensure the can is parallel to the surface at all times.
Cleaning
Health and safety
Safety, Health and Environment
International is a brand of Imperial Chemical Industries Limited trading as ICI Paints AkzoNobel. It is the policy of AkzoNobel to provide the highest standard of safety, health and environmental advice and information. Safety data sheets are freely available on the website or to users on request.
Ensure good ventilation during application and drying.
Avoid the inhalation of dust. Wear a suitable face mask if dry sanding.
Special precautions should be taken during surface preparation of pre-1960s paint surfaces over wood and metal as they may contain harmful lead.
Trade tip
Not suitable for use on hobs, cookers or the inside of microwave ovens. If in doubt, please contact International for advice before using this paint.
