Ensure all surfaces are clean, dry and free from dirt, grease and other contaminants.
Bare concrete: Brush thoroughly with a wire brush. Remove all dust. Avoid the inhalation of dust by wearing a suitable face mask. The floor should then be sealed with a sealer such as International Concrete Sealer.
New concrete: Newly laid concrete must be allowed to dry for at least one month. Then treat as for bare concrete.
Bare brick or stone: Remove all loose and flaking material by wire brushing.
Previously painted concrete, brick or stone: Brush thoroughly with a wire brush to remove loose or flaking paint. Sand down and wipe clean. Treat any bare surfaces as above.
Very smooth and hardened surfaces: Contact the Customer Advice Centre for advice on preparation.
How to use
Stir well with a broad stirring stick to the bottom of the can. This is essential to ensure an even colour and finish.
Apply two coats using a natural bristle brush or roller suitable for solvent-based paints.
Cleaning
Remove as much paint from brushes as possible before cleaning. For best results use Polycell Brush Cleaner.
Health and safety
Safety, Health and Environment
International is a brand of Imperial Chemical Industries Limited trading as ICI Paints AkzoNobel. It is the policy of AkzoNobel to provide the highest standard of safety, health and environmental advice and information. Safety data sheets are freely available on the website or to users on request.
Ensure good ventilation during application and drying.
Avoid the inhalation of dust. Wear a suitable face mask if dry sanding.
Special precautions should be taken during surface preparation of pre-1960s paint surfaces over wood and metal as they may contain harmful lead.
Trade tip
Although Doorstep Paint contains a slip resistant additive, absolute safety cannot be guaranteed.
Not suitable for use over self-levelling compounds, dustproofers and hardeners or on power-floated floors.
Not for use on tiles, including quarry or terracotta tiles, asphalt or thermoplastic floors.
