Ensure all surfaces are clean, dry and free from dirt, grease and other contaminants.
Bare surfaces: Prime with Japlac Primer Undercoat. Sand smooth and wipe clean.
Previously painted surfaces: Remove any flaking or blistered paint/rust, and ensure any areas of bare wood or metal are spot primed. Always sand down and wipe clean.
How to use
Mask off the surrounding area to protect from overspray.
To ensure optimum performance store the aerosol at room temperature for at least 2 hours prior to use.
Shake the can for a minimum of 1 minute, then hold the can at the top and swing bottom of can in a circle for at least 1 minute making the ball travel around the bottom groove.
To avoid runs and sags spray in light even strokes from a distance of 25-30cm.
Spray a light covering coat.
When touch dry (after 20 minutes) apply a further 2-3 coats, allowing 20 minutes between each coat.
Leave painted surface overnight to harden completely.
Cleaning
Health and safety
Safety, Health and Environment
International is a brand of Imperial Chemical Industries Limited trading as ICI Paints AkzoNobel. It is the policy of AkzoNobel to provide the highest standard of safety, health and environmental advice and information. Safety data sheets are freely available on the website or to users on request.
Ensure good ventilation during application and drying.
Avoid the inhalation of dust. Wear a suitable face mask if dry sanding.
Special precautions should be taken during surface preparation of pre-1960s paint surfaces over wood and metal as they may contain harmful lead.
Trade tip
After use invert can and spray to clear valve.
Store in a dry well ventilated area and protect from frost and strong sunlight.
